Doc's Dream System Pond Kit
For Ponds or Water
Gardens -- 1000 to 2500 Gallons
Garden spaces can be made delightful with the addition of
a pond. Double the enjoyment with a Doc's Dream System that is no more
expensive than other pond systems (and less expensive than some) and is the
lowest maintenance pond system available for the homeowner to install himself!
Complete with illustrated instructions and Doc's own personal attention, his
Dream System is truly a dream to install, operate and enjoy. We've come up
with a kit that has all the equipment (except for a few things one can get
cheaper at discount hardware stores) necessary to build an "average"
state-of-the-art, low-maintenance Doc's Dream System.
This kit is designed for an "average pond" of
1000 to
2500 Gallons
Our definition of an "average pond" is one of
natural shape
consisting of a
waterfall and possible small stream. Water is pulled from the bottom
re-circulation drain via a pump capable of self-priming, through a bead filter
(and maybe other optional equipment) then up to the top of the waterfall where
it will flow gently on low (and energy-efficiently) or switch to high for
heavier flow and during backwashing of the filter. The following factors must be true for this
kit to work for you.
-
The pond is no larger than 2500 gallons
-
The pond is no more than 10 ft. at its longest
length, 10 ft. at its widest width and 3 1/2 ft. at its deepest depth.
-
The length of the stream is no more than 10 ft.
NOTE:
No liner has been factored into the kit for a stream so if a stream is wanted
extra liner must be ordered.
-
You anticipate a quiet flow during normal
operation. You can switch
the pump to high when showing off for company or during backwashing.
-
The total elevation from water level of the pond
to the very top of the waterfall is no more than 4 ft.
-
The total lineage from the bottom re-circulation
drain to the top of the waterfall is no more than 15 ft.
If you are planning a pond that fits all the factors
we've listed, the recommended equipment for this kit will work brilliantly for
you. If, for example, you want a 20-foot waterfall with cascading
white-waters the pump chosen for the kit will not work for you. In that
case, call us at (770) 663-6325 or
email us for the equipment we would recommend so that you can be satisfied
with the results.
20 x 20 Piece 45 mil EPDM Liner
| 45 mil EPDM Rubber Liner,
20 x 20
Ft. Piece |
Item #
-- Liner020020 |
Order |
| Covers area no more than
10'
across, 10' at widest and 3 1/2' at deepest.
**This is a cut-goods piece
and cannot be returned for credit. |
Price
(@ .85 sq. ft.)...$ 340.00 |
|
25 ft. 52" Underlayment
(Don't forget to change the quantity to 25 ft - or to your
specific needs)
| Green Underlayment, 52" Tall |
Item #
-- Under52 |
Order |
| Priced by linear foot |
Price
(per linear ft)...$ 2.05 |
|
2" Bottom Drain
|
2"
Bottom Drain with Anti-Vortex Cover
This unit comes with an anti-vortex
cover for the safety of your fish. Made of PVC - PVC fittings
must be used along with drain.Can
you use a tube of E-6000 to Waterproof your Drain? Click
HERE. |
Drain200 |
$ 79.95 |
|
2" & 1 1/2" Gate Valves
 |
Gate Valve
Gate opens and closes to allow more or less
water flow through. Connects to PVC. |
1 1/2" |
GValve112 |
$ 17.95 |
|
|
2" |
GValve200 |
$ 21.95 |
|
2" Check Valve
 |
Check Valve
Also known as a backflow preventer, it allows
water to flow in only one direction. Connects to PVC.
Illustrated installation instructions included with purchase.
(Much better to use than standard spring-action
valve found at most hardware stores because it does not restrict the
flow like the spring-action valve does.) |
1 1/2" |
CValve112 |
$ 24.95 |
|
|
2" |
CValve200 |
$
29.95 |
|
|
3" |
CValve300 |
$
49.95 |
|
|
Click
here to find more
information about Check Valves |
1 hp, 2 sp MaxFlow External Pump
[Store/Pumps/External/MFlow100.htm]
2" PVC Flex Hose
| |
PVC Flex Hose
White, not ribbed hose is best to use when it is to be
buried or if gluing like regular stiff PVC is desired. Prevents use of
elbows and improves waterflow. |
1
1/2" |
PXH112 |
$ 2.25
per ft. |
|
| 2" |
PXH200 |
$ 3.00
per ft. |
|
1 1/2" Pump Quick
Disconnects
 |
Male Threaded Quick Disconnect
Allows quick removal of pump or UV unit by
unscrewing. Connects to PVC. |
1 1/2" |
QD112 |
$ 12.95 |
|
|
2" |
QD200 |
$19.95 |
|
ProBead™
120 Bead Filter
[Store/Filters/ProBead/PB120.htm]
Complete Basic
Doc's Dream System Kit
for Ponds 1000 to 2500 Gallons
Kits are shipped via common carrier and will add
$300 to $500 to the cost of the order. Your order will not reflect the
cost of shipping until it is charged. We will contact you with the cost of
shipping before the kit is shipped.
SAVE $ on cost of liner when complete kit is ordered.
Flooded Suction Kit
(when the external pump is to be installed below the water
line of the pond)
Includes: 20x20 liner / 25 ft. 52" Underlayment /
2" Bottom Drain / 2" Gate Valve / 1 hp, 2 sp ProFlow External Pump / 25 ft. 2"
PVC Flex Hose / 2 ea. Pump Quick Disconnects / ProBead 120 Bead Filter /
Complete Installation Instructions |
Basic2500FS
$ 1785.00 |
|
Self-Priming Kit
(when the external pump is to be installed above the water
line of the pond)
Includes: 20x20 liner / 25 ft. 52" Underlayment / 2" Bottom Drain / 2" Check Valve /
1 hp, 2 sp ProFlow External
Pump / 25 ft. 2" PVC Flex Hose / 2 ea. Pump Quick Disconnects / ProBead
120 Bead Filter / Complete Installation Instructions |
Basic2500SP
$ 1788.00 |
|
OPTIONAL EQUIPMENT
Add an Ultraviolet Water Clarifier
Your system would take either a 25 or 40
watt Emperor unit, depending on the number of gallons and the amount
of sunshine you will have on your pond. Please refer to the
scale below to find the correct UV for your pond.
The Smart UV by Emperor Aquatics
for Koi Ponds and Water Gardens from 300 to 5000 Gallons
The Smart UV by Emperor Aquatics is our choice for most
ponds and water gardens up to about 4000 gallons. Superior quality and
great customer service puts Emperor Aquatics' Ultraviolet Water Clarifiers
(Sterilizers) way ahead of its competitors. We've been able to lower the
prices too! That makes them so affordable that you won't give those other
brands of UVs that are cheap and low-quality a 2nd look.
Have 1 inch flex hose? How about 1 1/2" hard
PVC pipe? No problem. We've made it easy for you to order
the right fit for your system.
At the store in Alpharetta we always fit the UV to our
customer's plumbing before they walked out the door. We can do the
same thing with our UVs that we sell over the internet. It's an exclusive
Pond Doc idea to offer Emperor Smart UVs in the most common connections.
You won't find this wide selection of connection options at other places.
If you do, they are stealing our idea!
Is your water flowing too fast through the UV?
No problem. Don't turn the volume down on your waterfall flow.
By-Passes allow you to control the amount of flow through your UV, no matter how
much water the pump is pumping. We have
EZ Emperor
By-Passes that can be added to your UV order or installed afterward.
The EZ Emperor By-Passes are offered in the same great selection of connection
options.
Want to know more about how the Smart UV works?
Click HERE.
18
watt Smart UVs by Emperor Aquatics
18 watt Smart UVs by
Emperor Aquatics for Koi Ponds, Goldfish Ponds and Water Gardens from 300
to 800 Gallons in Full Sun or up to 1000 Gallons in the Shade.
Dimension of unit: 22.75" x 3" Flow Rates through
unit should be between 300 and 500 gph. If your pump is
stronger than that - you need either a
by-pass
or a separate pump just for the UV. Comes standard with 2" Open Port. Order the standard model if you
also order a custom by-pass or prefer to install your own plumbing
connections. We can usually get this item out the same day if we
receive the order in time. |
| |
|
Item # |
Description (Connection Size and Type) |
Price |
Order |
|
EA02218-S |
STANDARD MODEL
18 watt UV with 2" Open Ports (no
connection adaptors - choose this option if you are ordering a
UV
custom by-pass) |
$ 199.95 |
|
|
EA02218-P112 |
18 watt UV with 1 1/2" PVC
Unions (connects to 1.5" PVC hard pipe) |
$ 219.95 |
|
|
EA02218-P200 |
18 watt UV
with 2" PVC Unions (connects to 2" PVC hard pipe) |
$ 224.95 |
|
|
EA02218-X050 |
18 watt UV with 1/2" Barb Fitting (connects
to 1/2" flex hose) |
$ 203.95 |
|
|
EA02218-X075 |
18 watt UV with 3/4" Barb
Fitting (connects to 3/4" flex hose) |
$ 205.95 |
|
|
EA02218-X100 |
18 watt UV
with 1" Barb Fitting (connects to 1" flex hose) |
$ 209.95 |
|
|
EA02218-X114 |
18 watt UV with 1 1/4" Barb Fitting
(connects to 1 1/4" flex hose) |
$ 215.95 |
|
|
EA02218-X112 |
18 watt UV with 1 1/2" Barb
Fitting (connects to 1 1/2" flex hose) |
$ 215.95 |
|
|
EA02218-X200 |
18 watt UV with 2" Barb Fitting (connects to
2" flex hose) |
$ 219.95 |
|
|
Optional Equipment:
EZ
Emperor By-Pass /
See Complete Replacement Parts &
Accessories List |
25
watt Smart UVs by Emperor Aquatics
25 watt Smart UVs by Emperor Aquatics for Koi Ponds,
Goldfish Ponds and Water Gardens from 800 to 1200 Gallons in Full Sun or
up to 1400 Gallons in the Shade.
Dimension of unit: 29" x 3"
Flow Rates through unit should be between 500 and
750 gph. If your pump is stronger than that - you need either
a
by-pass
or a separate pump just for the UV. Comes standard with 2" Open Port. Order the standard model if you
also order a custom by-pass or prefer to install your own plumbing
connections. We can usually get this item out the same day if we
receive the order in time. |
| |
|
Item # |
Description (Connection Size and Type) |
Price |
Order |
|
EA02225-S |
STANDARD MODEL
25 watt UV with 2" Open Ports (no
connection adaptors - choose this option if you are ordering a
UV
custom by-pass) |
$ 219.95 |
|
|
EA02225-P112 |
25 watt UV with 1 1/2" PVC
Unions (connects to 1.5" PVC hard pipe) |
$ 232.95 |
|
|
EA02225-P200 |
25 watt UV
with 2" PVC Unions (connects to 2" PVC hard pipe) |
$ 232.95 |
|
|
EA02225-X050 |
25 watt UV with 1/2" Barb Fitting (connects
to 1/2" flex hose) |
$ 223.95 |
|
|
EA02225-X075 |
25 watt UV with 3/4" Barb
Fitting (connects to 3/4" flex hose) |
$ 225.95 |
|
|
EA02225-X100 |
25 watt UV
with 1" Barb Fitting (connects to 1" flex hose) |
$ 229.95 |
|
|
EA02225-X114 |
25 watt UV with 1 1/4" Barb Fitting
(connects to 1 1/4" flex hose) |
$ 232.95 |
|
|
EA02225-X112 |
25 watt UV with 1 1/2" Barb
Fitting (connects to 1 1/2" flex hose) |
$ 232.95 |
|
|
EA02225-X200 |
25 watt UV with 2" Barb Fitting (connects to
2" flex hose) |
$ 239.95 |
|
|
Optional Equipment:
Custom UV By-Pass /
See Complete Replacement Parts &
Accessories List |
40 watt Smart UVs by Emperor Aquatics
40 watt Smart UVs by Emperor Aquatics for Koi Ponds,
Goldfish Ponds and Water Gardens from 1200 to 1700 Gallons in Full Sun or
up to 1900 Gallons in the Shade.
Dimension of unit: 43.75" x 3"
Flow Rates through unit should be between 750
and 950 gph. If your pump is stronger than that - you need
either a
by-pass
or a separate pump just for the UV. Comes standard with 2" Open Port. Order the standard model if you
also order a custom by-pass or prefer to install your own plumbing
connections. We can usually get this item out the same day if we
receive the order in time. |
| |
|
Item # |
Description (Connection Size and Type) |
Price |
Order |
|
EA02240-S |
STANDARD MODEL 40 watt UV with 2" Open Ports (no
connection adaptors - choose this option if you are ordering a
UV
custom by-pass) |
$ 260.95 |
|
|
EA02240-P112 |
40 watt UV with 1 1/2" PVC
Unions (connects to 1.5" PVC hard pipe) |
$ 295.95 |
|
|
EA02240-P200 |
40 watt UV
with 2" PVC Unions (connects to 2" PVC hard pipe) |
$ 295.95 |
|
|
EA02240-X075 |
40 watt UV with 3/4" Barb
Fitting (connects to 3/4" flex hose) |
$ 271.95 |
|
|
EA02240-X100 |
40 watt UV
with 1" Barb Fitting (connects to 1" flex hose) |
$ 275.95 |
|
|
EA02240-X114 |
40 watt UV with 1 1/4" Barb Fitting
(connects to 1 1/4" flex hose) |
$ 279.95 |
|
|
EA02240-X112 |
40 watt UV with 1 1/2" Barb
Fitting (connects to 1 1/2" flex hose) |
$ 279.95 |
|
|
EA02240-X200 |
40 watt UV with 2" Barb Fitting (connects to
2" flex hose) |
$ 289.95 |
|
|
Optional Equipment:
Custom UV By-Pass /
See Complete Replacement Parts &
Accessories List |
65 watt Smart UVs by Emperor Aquatics
65 watt Smart UVs by Emperor Aquatics for Koi Ponds,
Goldfish Ponds and Water Gardens from 1800 to 2600 Gallons in Full Sun or
up to 3000 Gallons in the Shade.
Dimension of unit: 70.5" x 3"
Flow Rates through unit should be between 900
and 1300 gph. If your pump is stronger than that - you need
either a
by-pass
or a separate pump just for the UV. Comes standard with 3" Body
and 1 1/2" PVC Unions. Order either model if you
also order a custom by-pass or prefer to install your own plumbing
connections. We can usually get this item out the next day if we
receive the order in time. |
| |
|
Item # |
Description (Connection Size and Type) |
Price |
Order |
|
EA02065 |
STANDARD MODEL
65 watt UV with 1 1/2" PVC Unions and with 1 inch barb fitting
included ( connects to either 1 1/2" PVC hard pipe or 1 inch Flex Hose - choose this option if you are ordering a
UV
custom by-pass) |
$ 519.95 |
|
|
EA02065-W |
65 watt UV with 1 1/2" PVC Unions with 1
inch barb fitting included (connects to either 1 1/2" PVC hard pipe or
1" barb fitting) and WIPER |
$ 549.95 |
|
|
Optional Equipment:
Custom UV By-Pass /
See Complete Replacement Parts &
Accessories List |
80 watt Smart UVs by Emperor Aquatics
80 watt Smart UVs by Emperor Aquatics for Koi Ponds,
Goldfish Ponds and Water Gardens from 2400 to 3500 Gallons in Full Sun or
up to 4000 Gallons in the Shade.
Dimension of unit: 44.5" x 15.5"
Flow Rates through unit should be between 1200
and 1500 gph. If your pump is stronger than that - you need
either a
by-pass
or a separate pump just for the UV. Comes standard with 2" Open Port. Order the standard model if you
also order a custom by-pass or prefer to install your own plumbing
connections. We can usually get this item out the next day if we
receive the order in time.
Service Instructions for Emperor Smart UVs |
| |
|
Item # |
Description (Connection Size and Type) |
Price |
Order |
|
EA02280-S |
STANDARD MODEL
80 watt UV with 2" Open Ports (no
connection adaptors - choose this option if you are ordering a
UV
custom by-pass) |
$ 524.95 |
|
|
EA02280-P112 |
80 watt UV with 1 1/2" PVC
Unions (connects to 1.5" PVC hard pipe) |
$ 544.95 |
|
|
EA02280-P112W |
80 watt UV
with 1 1/2" PVC Unions (connects to 2" PVC hard pipe) and
WIPER |
$ 709.95 |
|
|
EA02280-P112-3 |
80 watt UV with 1 1/2" PVC Unions (connects to
either 1 1/2" PVC or 1" Flex Hose) with 3" Tube Body |
$ 720.95 |
|
|
EA02280-P112W-3 |
80 watt UV
with 1 1/2" PVC Unions (connects to either 1 1/2" PVC or 1" flex hose)
with 3" Tube Body and WIPER |
$ 761.95 |
|
|
Optional Equipment:
Custom UV By-Pass /
See Complete Replacement Parts &
Accessories List |
130 watt Smart UVs by Emperor Aquatics
130 watt Smart UVs by Emperor Aquatics for Koi Ponds,
Goldfish Ponds and Water Gardens from 3500 to 5200 Gallons in Full Sun or
up to 5500 Gallons in the Shade.
Dimension of unit: 70.5" x 3"
Flow Rates through unit should be between 1500
and 2000 gph. If your pump is stronger than that - you need
either a
by-pass
or a separate pump just for the UV. Comes standard with 3" Body
and 1 1/2" PVC Unions. Order the either model if you
also order a custom by-pass or prefer to install your own plumbing
connections. We can usually get this item out the next day if we
receive the order in time. |
| |
|
Item # |
Description (Connection Size and Type) |
Price |
Order |
|
EA02130 |
STANDARD MODEL
130 watt UV with 1 1/2" PVC Unions and with 1 inch barb fitting included
(connects to either 1 1/2" PVC hard pipe or 1 inch Flex Hose) |
$ 899.95 |
|
|
EA02130-W |
130 watt UV with 1 1/2" PVC Unions with 1
inch barb fitting included (connects to either 1 1/2" PVC hard pipe or
1" barb fitting) and WIPER |
$ 949.95 |
|
|
Optional Equipment:
Custom UV By-Pass /
See Complete Replacement Parts &
Accessories List |
Service Instructions for Emperor Smart UVs
Accessories for
Smart UVs
We recommend that 2" UV Quick Disconnects be installed on all Emperor
Aquatics units for ease of removal when winterizing the unit. Get
these at reduced prices whenever you buy an Emperor Aquatics brand
ultraviolet water clarifying unit.
|
|
Item #
QDE200
2" Quick Disconnect Unions for Emperor Aquatics SMART UV Products
(not for HO units) --
2 are needed per unit.
This is the FULL PRICE that is charged if these are ordered
separately and not when purchasing a unit. The quick
disconnects may be shipped in white, not black, depending on
stock. These do not fit the HO Units. |
$
12.50 ea. |
|
|
|
Item #
QDE200Disc
2" Quick Disconnects for Emperor Aquatics UV Products (Discounted
Price - not for HO units) -- 2 are needed per
unit.
*Note: This is a
discounted price used when purchased with an Emperor UV unit.
If
ordered without the purchase of a unit, the standard price of
$12.50 will be charged. Quick Disconnects may be shipped
in white, not black, depending on stock. Will not fit HO
units. |
$ 9.95
ea. |
|
 |
Item # 20624
Service Kit for Emperor Aquatics Smart
UV Units -- Includes all the
"rubber" parts needed for all sizes of the Smart UV by Emperor
with Emperor Union Assemblies.
Does not fit HO units. **Order 2 kits for 80 watt and
130 watt units**
Service Instructions for Emperor Smart UVs |
$
15.95 ea. |
|
 |
Item #
EA20618IS
Quartz Sleeve Gasket and O-Ring Set
for use with all Emperor Aquatics Smart UV Units -- Includes
Gasket and O-Ring that fits the quartz sleeve on all sizes of the Smart UV by Emperor,
including HO units. **Order 2 kits for 80 watt and
130 watt units**
Service Instructions for Emperor Smart UVs |
$
9.95 ea. |
|
Go To:
All UVs /
Emperor Aquatics UVs /
Emperor Aquatics
Parts Department /
Installation
and Servicing Instructions /
All
Emperor Aquatics Products
© copyright 1997 - 2008,
PondDoc.com.
All Rights Reserved. / Order Info: (404) 375-9600
/ Technical Info: (770) 663-6325
By-Pass for 25-watt
Emperor Aquatics UV with 2" Quick Disconnects and Gate Valve
| Custom By-Pass with 2"
Quick Disconnects and Gate Valve for 25-watt Emperor UV |
# BPass25200
$79.95 |
|
By-Pass for
40-watt
Emperor Aquatics UV with 2" Quick Disconnects and Gate Valve
| Custom By-Pass with 2"
Quick Disconnects and Gate Valve for 40-watt Emperor UV |
# BPass40200
$ 79.95 |
|
2" UV Quick
Disconnects
| 2" Quick
Disconnects for Emperor Aquatics 2" Ports |
# UVQD200
$ 12.95 |
|
Fish-Safe Skimmer
|
 |
Fish
Safe Skimmer
This skimmer can be installed
directly into the side of the pond or without making a hole in the
liner. It attaches to a PVC arm that
protrudes from the wall of the pond via a bulk head fitting. Another
method would be to use hard PVC and have it attach over the side of the
pond. The basket inside the
skimmer floats up with the water level which gives a little room for lower
water levels before it begins to suck in air. |
AES750B |
$ 119.95 |
|
1 1/2" Bulk Head Fitting
 |
Bulk Head
Fittings, Double Female Threads -
Double threaded polypropylene bulk heads provide a watertight solution
when a hole is needed in the side of a rubber liner or hard plastic
container. The perfect piece for installing a fish-safe skimmer
or jets through the liner. |
Item # |
Price |
Order |
| |
1/2" |
BH012 |
$10.95 |
|
| |
3/4" |
BH034 |
$11.95 |
|
| |
1" |
BH100 |
$13.95 |
|
| |
1 1/4" |
BH114 |
$15.95 |
|
| |
1 1/2" |
BH112 |
$16.95 |
|
| |
